Immediate Application/Immediate Effect
Highly Safe Coagulant
Polluted Water Treatment Agent
A highly safe product that has an immediate effect on water quality.
Formulated with a catalytic core in the inorganic coagulant, it quickly forms a good and heavy flock and promotes the flocculated precipitation of raw water from high-turbidity to low-turbidity. Safety has been guaranteed by a toxicity test performed on Japanese Killifish.
Economical due to gradual and delayed dissolving effect.
Loaded into net bags in 1 kg portions, this product dissolves gradually. When turbidity does not occur, it can be removed and the remaining product can be reused after drying, making it an economical product without waste.
Efficient clarification can be achieved by using in combination with the flow inclined flap PATORESIA.
This is a multifunctional coagulant for which the optimum usage method can be selected to match the utility such as deployment by hanging, fixing, dragging or dumping methods or at multiple points in the turbid water channel. Also, clarification efficiency can be even further increased through using together with the ladder type PATORESIA, such that the active flock adheres to the curtain section of the PATORESIA.
Beaker Experiment
Turbid Water
Treated Water after
Five Minutes
Principle Range of Applications
Turbid water from general river works/dredging etc.
Construction related turbidity in dams, lakes, ponds, harbours and the sea
Wide-area development construction related turbidity, rain water/red-water turbidity
Turbid water during grab dredging (watercourse dredging/filling of caissons)
Turbid water during excavation operations
Clarification of untreated drainage water during rainfall
Turbid water during the dredging of reservoir beds during the dry season
A raw water pH within the flocculation range of 6 - 9.5 is assumed.
Turbid water in balancing reservoirs and in golf course ponds
Waterworks (drainage facilities)
Industrial waterworks
Industrial wastewater
Settlement drainage
Drainage ditches/Septic tank discharge 
Product Details
Technical Name
Inorganic mixed-type
solid coagulant
Composition
Composed of aluminium sulphate, rare earths and natural organic
matter
Throughput per 1 kg (Approximate)
Low turbidity : 1,000m3
High turbidity : 200m3

*Values for retained turbid water
 (Cisterns/tanks/beakers etc.)
Applicable Range of Raw
Water
pH6~9.5
Effective Flocculation Range
pH6~8.5
Storage Method
Store in a place away from
moisture or humidity and out
of direct sunlight
Packaging
1 box containing 5kg (1kg x 5)
1 box containing 10kg (1kg x 10)
MLIT NETIS registration number KT-070107
As this product has the purpose of being simple and immediate to use rather than being quantitatively disposed of by machinery, please adjust the amounts used after confirming the flocculation conditions on the scene.
Testing in advance in a small container is recommended.
Note 2)
Elution time varies with usage conditions.
Note 1)
Generally applicable to all kinds of water treatment, and recommendable for environmental improvement.
Supplemented with an M alkali agent in order to promote flocculation.
This suppresses the pH and demonstrates an even more successful flocculation effect.
Providing technological development products relating
to water purification and environmental conservation, and supporting the improvement of environmental quality.
Inorganic Mixed-Type Solid Coagulant
-Chemical Dosing Equipment Unnecessary
ソリッドースNCC
MLIT NETIS Registered Technology KT-070107
Can be used by directly immersing
in turbid water without using equipment.
Operation and maintenance by means of equipment or special technicians is unnecessary. Can be used directly at the source of the turbidity and so can facilitate an immediate response in emergencies.
The strength of solid coagulants is that they remain in the turbid water and continuously demonstrate a flocculation effect in that location, unlike liquid or powder coagulants, which constantly require infusion by human or machinery.
Please use with consideration for the following points.
1. Sufficient agitation is necessary after dissolution. 

  ・Agitate naturally   ・Agitate with a pump   ・Use a mixer

2. Reaction time for the turbid water and NCC flocculation is necessary.

  ・Install at a location as close as possible to the turbid water source.
   (Reaction time is insufficient close to a river sluice)
Copyright (C) 2009 nihonsolid Co.,Ltd. All Rights Reserved